Talking Pools Podcast
If you’ve ever stared at a test kit like it personally insulted your family… welcome home.
Talking Pools Podcast is the pool industry’s “pull up a chair” show—part shop talk, part field manual, part therapy session—built for people who actually live on pool decks: commercial operators, service techs, builders, facility managers, and anyone responsible for water that can’t afford to go sideways. The network was created to level up the pool industry with real-world conversations on water chemistry, filtration, troubleshooting, construction, safety, and the business side of keeping pools open and budgets intact.
Here’s the hook: it’s not theory-first. It’s experience-first—a roster of seasoned pros (with 250+ years of combined “been there, fixed that” wisdom) turning complicated problems into practical moves you can use the same day. And it’s not one voice, one vibe, one corner of the industry: it’s a network of shows designed to reflect how diverse this work really is—different regions, different specialties, different personalities.
Also worth saying out loud: women aren’t “special guests” here—they’re on the mic as hosts, from the beginning, with an intentionally balanced roster. That matters, because the best ideas in this industry don’t come from one lane—they come from the whole road.
If you want a podcast that can make you laugh and make you better at what you do—without pretending the job is easier than it is—Talking Pools is the one you queue up before the first stop, and keep on when the day starts getting weird.
Talking Pools Podcast
WTF?! Pool temp reads 200ºF 🔥
Use Left/Right to seek, Home/End to jump to start or end. Hold shift to jump forward or backward.
This is the one where Kelli and Dan talk about troubleshooting swimming pool heaters and more.
Take our 2-minute listener survey!Help us to provide you with more of the content you want to hear. Take our quick 2-minute survey!
CMAHC
The Council for the Model Aquatic Health Code promotes health & safety at public swimming pools
Disclaimer: This post contains affiliate links. If you make a purchase, I may receive a commission at no extra cost to you.
Thank you so much for listening! You can find us on social media:
Email us: talkingpools@gmail.com
A Comprehensive Guide to Conducting a Pool Heater Inspection: A Pool Service Technician's Perspective
Introduction:
As a pool service technician, one of the crucial tasks you'll encounter is conducting a pool heater inspection. Properly functioning pool heaters are essential for ensuring year-round enjoyment of the pool, particularly in colder climates. Regular maintenance and inspections can help identify and prevent potential issues, ensuring your clients have a fully operational and efficient heating system. In this article, we will outline the step-by-step process to conduct a thorough pool heater inspection, enabling you to provide top-notch service and keep your clients' pools at the perfect temperature.
Step 1: Safety First
Before starting any inspection, it is vital to prioritize safety. Ensure that the pool heater is turned off and disconnected from the power supply to avoid any electrical mishaps. Take necessary precautions by wearing personal protective equipment (PPE), including gloves and safety glasses, to protect yourself throughout the inspection process.
Step 2: Visual Examination
Begin by visually inspecting the pool heater for any signs of damage or wear. Look for rust, corrosion, or cracks on the exterior components, such as the heat exchanger, burners, and gas lines. Pay close attention to the wiring and electrical connections, ensuring they are intact and free from any visible damage.
Step 3: Check for Proper Ventilation
Proper ventilation is crucial for the safe operation of a pool heater. Inspect the exhaust vent and intake air vents, making sure they are clear of any obstructions like debris, leaves, or pests. Ensure that the venting system complies with local building codes and manufacturer's specifications. Any signs of blockages or damage should be addressed promptly to maintain optimal airflow and prevent dangerous carbon monoxide buildup.
Step 4: Inspect the Heat Exchanger
The heat exchanger is a vital component of a pool heater, responsible for transferring heat to the pool water. Carefully inspect it for any cracks, leaks, or scaling. Scaling occurs when minerals and debris accumulate on the surface of the heat exchanger, reducing its efficiency. If scaling is observed, recommend descaling or cleaning procedures to restore optimal heat transfer.
Step 5: Evaluate the Burners
Next, examine the burners for signs of wear or damage. Ensure they are clean and free from debris or soot buildup, as this can impact their efficiency and performance. Check the burner flames; they should be blue and stable. If the flames appear yellow or flickering, it could indicate a combustion problem, which should be promptly addressed by a professional technician.
Step 6: Review the Gas Connections
Inspect the gas connections, including valves, piping, and fittings, for any leaks or damage. Utilize a gas leak detector or soapy water solution to identify any potential gas leaks. If a gas leak is detected, it should be addressed immediately by a licensed professional to mitigate safety risks.
Step 7: Electrical Components
Evaluate the electrical components of the pool heater, including the control panel, wiring, and electrical connections. Ensure that all connections are secure and free from corrosion or damage. Test the control panel to verify its functionality and accuracy. Any electrical issues should be addressed by a qualified electrician or pool heater technician.
Step 8: Check the Water Flow
Inspect the pool's water flow system, including the pump, filter, and plumbing. Adequate water flow is crucial for the proper operation of the pool heater. Ensure that the water flow rate meets the manufacturer's specifications. Look for any signs of blockages, leaks, or damaged components that could hinder water circulation.
Step 9: Documentation and Recommendations
Finally, document your findings, including any necessary repairs, maintenance, or replacement recommendations. Provide a detailed report to the client, explaining the condition of their pool heater and the
